Say goodbye to bulky, ugly helmet dryers — enter a stylish, efficient new era of helmet care
TL;DR: Your fastest safe fix
Expect a wearable-dry helmet in ~20–40 min for commute sweat (3/4 → many full-face). If the helmet is soaked/waterlogged, plan 1–2 h. Keep max temperature ≤48 °C, with noise around ~35 dB(A) at 1 m.
1) Diagnose your situation
- Smell sticks around? You need even airflow plus a deodorize pass.
- Takes hours when not soaked? Airflow isn’t reaching cheek-pad dead zones.
- Liner feels “cooked”? Reduce hotspots; cap max temp at ≤48 °C.
2) Fix recipes you can run today
A. Daily commute sweat (3/4 or many full-face)
- Run low heat ≤48 °C for ~20–40 min depending on shell/liner.
- Align crown/cheek vents with the airflow channel; don’t block pad channels.
Expect: wearable-dry with no wet-cold patches.
B. Soaked after heavy rain or ski (waterlogged)
- Low-heat pass ~40–60 min → ambient/clean-air ~20–60 min (two short passes beat one long blast).
- Slightly lift cheek pads to open cross-flow.
Expect: 1–2 h total depending on materials.
C. Persistent odor (gym/football/hockey)
- Dry as above, then deodorize with UV/ion for 10–15 min (shielded & indirect).
Expect: odor score improves to 4–5/5 within 2–3 cycles.
3) The science you rely on
- Even airflow > brute heat: flow through crown and cheek pads to prevent damp pockets.
- Safe band: keep max ≤48 °C to protect glue and leather trims.
- Hygiene assist: UV and ion modules operate inside the helmet-cavity airflow path, shielded from direct exposure.
4) Real-world numbers you can trust
| Metric | Target / Typical | Method & Notes |
|---|---|---|
| Dry to wearable (sweat) | ~20–40 min (3/4 → full-face) | 3+ runs, mean ± σ |
| Soaked case | 1–2 h | Heavy rain / waterlogged ski liners |
| Max temperature | ≤48 °C | Liner-surface probe |
| Noise @ 1 m | ~35 dB(A) | SPL meter, front-on 1 m |
| Airflow | TBD (diagram) | Publish airflow schematic |
| Energy / cycle | see table below | AC 110 V, 100 W rated |
5) Energy per cycle (100 W rated, AC 110 V)
Formula: Wh = Watts × (minutes ÷ 60)
| Duration | Energy (Wh) |
|---|---|
| 20 min | 33.33 Wh |
| 40 min | 66.67 Wh |
| 1 h | 100.00 Wh |
| 2 h | 200.00 Wh |
Measured/estimated at the plug; varies by mode and ambient.
6) What you get & what it fits
- Power: AC plug, 110 V, 100 W
- Temperature: capped at ≤48 °C (liner-safe)
- Noise: ~35 dB(A) @ 1 m
- Air modules: UV + ion pre-installed inside the airflow path (shielded; no direct exposure)
- Aroma: optional base module, sold separately
- Compatibility: fits full-face shapes; 3/4 supported; see setup guide for others
- Style: Lightweight
- Recommended uses: Cycling, Horse Riding, Motorcycling, Skiing
- Materials: ABS outer; foam inner
- Model: B2 (MPN: B-2)
- Net weight: 1.64 kg (3.61 lb)
- Package dimensions: 16.57 × 12.56 × 6.57 in (≈ 42.1 × 31.9 × 16.7 cm)
- Also sold on our Amazon store (oplacehome). For the best price and the latest version, order on our official store.
7) Setup in 3 steps
- Fluff pads; align crown/cheek vents with the airflow path.
- Run ≤48 °C low heat for ~20–40 min (or 1–2 h if soaked).
- Add 10–15 min deodorize (UV/ion) when odor persists (shielded, indirect).
8) Policies & shipping
- Free shipping; same-day dispatch on orders before cut-off. U.S. delivery within 7 days.
- 30-day returns. Unused items: easy returns. Lightly used items may incur a reasonable hygienic restoration fee to safely restock.
9) Promo & social proof
Promo: extra 50% off through Black Friday — code NEW50.
- “Best helmet freshener money can buy. Works with MTB, MC, and full-face—must-have if you own multiple helmets.” — F. Lun, Sep 9, 2025
- “Works great—wish it didn’t auto-timeout at three hours. Otherwise perfect.” — Ryan, Sep 5, 2025 (Some safety timers may stop at 3h; restart for soaked cases.)
- “Cleaner look than my HUCK dryer—partner-approved aesthetics. Right size, simple: set, press, walk away.” — CycleLoop, Sep 6, 2025
- “Why didn’t this exist decades ago? Perfect with my boot dryer; dries fast, stays fresh, pre-warms on cold days.” — letmepicyou, Aug 3, 2025
- “Well-built and easy. Made my Shoei smell like new; dried overnight at room air after a 12+ hr ride.” — BigDogCrew, Aug 10, 2025
10) Ready to act
- Usage guide: /pages/helmet-01
- Buy now: /products/helmet-dryer (in stock, fast shipping)
- Reminder: Also sold on our Amazon store (same brand). Best price and latest version are on our official store.
