Fast, Low-Heat Helmet Drying — As Quick As ~20–40 Minutes*
Get your helmet liner dry and fresh after everyday rides with gentle, temperature-controlled airflow. The unit ships with a reliable 60-minute default preset, and for light-moisture scenarios you can simply stop early at ~20–40 minutes.
*Dry-time varies with liner thickness, moisture load (sweaty vs. soaked), and room humidity/temperature.
Why Riders Choose OPlace
-
Everyday quick-dry: most helmets feel dry to the touch in ~20–40 min under typical indoor conditions.*
-
Low-heat care (≤ 48 °C): protects liners, foams, and adhesives while moving moisture out.
-
Quiet operation (~35 dB(A)): easy to use at home or office without disturbance.
-
Flexible use: 60/120/180-minute presets cover heavier moisture; for daily rides, stop early when dry.
-
Optional UV / Ion mode for odor control: designed to help with freshness inside the chamber. Not a medical device; not intended for sterilization or disease prevention.
How We Test
Everyday-commute protocol (internal): Room 22–26 °C, 40–60% RH; full-face commuter helmet, removable liner at “sweaty-damp” (not soaked). Standard airflow, temperature cap ≤ 48 °C. End condition: dry-to-touch + internal humidity drop plateau. Typical results: ~20–40 minutes. Heavier moisture or thicker liners may require 60–120+ minutes.
Timers & Use
-
Presets: 60 / 120 / 180 minutes (60-minute default).
-
Daily rides: many users stop early at ~20–40 minutes when the liner feels dry.
-
Heavier moisture: run the 60/120/180-minute presets as needed.
-
Manual stop anytime for convenience and energy savings.
Compatibility
Works with full-face, modular, 3/4, MTB, road cycling, and ski/snow helmets. Also suitable for gloves and shoes with appropriate adapters.
Specs
- Airflow: dual-port forced air
- Temperature limit: ≤ 48 °C (maintained)
- Noise: ~35 dB(A)
-
Timers: 60 / 120 / 180-minute presets (60-minute default); manual stop anytime
-
Power: Input: AC 110–120 V, 60 Hz
-
What’s in the Box
- OPlace Smart Helmet Dryer
- Adapters (as shown)
- User manual
Safety & Compliance
-
Not a medical device; not intended to sterilize or to prevent/treat disease.
- UV / Ion mode is for odor control inside the chamber. Avoid direct exposure to active UV light.
- Always follow the user manual and safety warnings.
FAQ
Q: Why mention ~20–40 minutes if the default preset is 60 minutes?
A: The 60-minute default ensures reliable drying across seasons and heavier moisture. For everyday rides, many users find ~20–40 minutes sufficient and simply stop the cycle early.
Q: Does the UV feature disinfect?
A: It is designed for odor control to help keep gear fresh. It is not a medical sterilizer.
Q: Will heat damage my liner?
A: The dryer uses low-heat, temperature-limited airflow (≤ 48 °C) to help protect foams and adhesives while removing moisture.
Policies
Clear shipping times, returns/exchanges, and contact details are available on our policy pages. Prices, availability, and specifications may change without notice.